If you don’t like using a fork, you can use a rubber scraper to scrape off the lead, and that is what you should do.
It is a great alternative to using a sharp knife or a spoon.
You can also use a metal scraper to scrape out the metal part of the lead.
You will want to scrape the lead with a metal scraper, but be careful not to scrape too much lead, because that will cause the lead to get stuck in the metal scrapper.
So you want to take care not to let the lead stick in the scrapper and then take it out again.
If you can, use a sharp or small metal spoon to scrape up the metal.
The scrap will get dirty.
The only thing that is left is to make a batch of the scraped lead and cook it.
Here are the steps you will need to follow: 1.
Prepare the scrap.
You need to get your scrap of lead from the source you bought it from.
For example, if you bought scrap metal from the scrap yard, you will want the scrap to be from that source.
You do not want to use it from the trash or from the garbage.
Cook the lead in a pan.
Heat a pan with a couple of tablespoons of oil over medium-high heat.
When it is hot enough, add the scrap and cook for about a minute.
The lead will harden and become soft.
Use a spatula to scrape away excess grease from the lead and get rid of any particles of lead that you have.
Use your spoon to push the lead into the pan and cook until it is cooked through and is almost cooked.
Serve the cooked scraped up lead with some hot sauce and some chopped coriander.